Macam² Laptop

Monday, June 13, 2011

How to Install PC Or Laptop SATA Aided Software n-Lite

If the computer (pc / laptop) you use SATA type hard drive and choose to install Windows XP Operating System, chances are when you install Windows XP can not recognize SATA hard disk, but your hard drive can be recognized by the bios, if this happens then you should inject the sata drivers on your computer into a windows installer file. Usually files sata drivers already in the cd driver notebook / mainboard that you get when you buy a computer. (If the cd is not there to ask your computer vendor.)

If the driver is not in the cd sata, you can find on your computer manufacturers' Web sites, the site goes to the driver tab, then do a browse and use the keyword as specified by your computer. For notebook use code or your notebook series:eg: (laptop) Acer TravelMate 6291, (Pc) use type and series mainboard eg Gigabyte GA-P31-S3G
Description: From personal experience, some computer or notebook now there is no need to perform injection sata drivers, such as notebook acer latest type rata2 ill need sata drivers, just need to do a hard disk interface settings in the bios, if you want to install Windows XP then change the hard drive interface to IDE, if you want to install windows vista hard drive interface to change settings Achi.
Once you get your sata drivers on your computer, you need to do is inject the sata drivers
Software to inject sata drivers to windows installer is nlite (a freware software), you can download the software they will be on site: http://www.nliteos.com or http://www.nliteos.com/download.html

Once downloaded, try to install nlite, if not installed on your computer usually needs to be installed windows XP service pack, ie NET Framework 2.0can be downloaded at:http://www.nliteos.com/download.html, http://www.microsoft.com/downloads or in http://www.microsoft.com/downloads/details.aspx?FamilyID=79bc3b77-e02c-4ad3 -aacf-a7633f706ba5 & displaylang = en


1. The next step is to begin the injection process sata drivers to windows installer. This process should you do on a computer that has an active Friends windowsnya.
Copy the entire contents of the windows installer cd into the hard drive, name the directory eg WinXPSP2
Then run the program nlite



2. Click Next

3.
Click Browse, navigate to the directory that contains the file windows installer (D: WinXPSP2)


4. Click Next



5.
Click Next, then the following dialog box will appear:


6.
Click Drivers and Bootable ISO until the button is green
(Driver: to integrate sata drivers into the driver eg wiindows installer, you can also include the other driver)
(Bootable ISO for windows installer that you create can boot automatically when it has copied to CD)
Click the Next button



7.
Select Multiple driver folder if the driver is more than one, if only one file just select a single driver


8.
Find the file that contains the sata drivers on your computer, after the meet click OK

9. Click Ok



10. Click OK


11.
Click Yes in the dialog box "Do You Want to start the process?"


12.
Click Next (you've managed to integrate sata drivers into the windows installer), then you will create an ISO file or directly to a CD blank diburning


13. Now you can first create the ISO, or burn directly to a blank CD. Insert the CD into the CD RW Drive and press the Burn button,
Congratulations you already have a master file windows installer homemade.

14. Hereinafter step is to go back to your first computer, run the computer and set the bios settings for boot starts from the CD ROM.

15. Please install the windows installer file to a CD before, follow instrkusinya, would not be asking for sata drivers sata hard drive again and you already can be recognized by Windows XP (if not already known means there are sata driver files that you have not injected into the windows installer, please re doing the procedure 1 to 12 for the fix)

Good luck .....!!!!!!

1 comment:

Share

Twitter Delicious Facebook Digg Stumbleupon Favorites

 
free counters